Thursday, 30 July 2015

Duplex UNS S31803 Forged Fittings And Their distinctive benefits



The main duplex stainless steel cast was made in Sweden in the year 1930 at Avesta. More up to date steel making advancements accommodate quicker assembling of these extraordinary quality steels that can be controlled for their nitrogen content. Duplex UNS S31803 forged fittings were made to accommodate fittings that have sufficient quality and have erosion resistance properties even in the marine environment.

Points of interest of Duplex forged fittings
The Duplex UNS S31803 alloy offers some novel and unmistakable favorable circumstances that are not offered by the forged fittings that are comprised of other more established combinations. These forged fittings have improved quality and can prompt sparing of weight while formulating mechanical procedures. Duplex and Super Duplex fittings with lower weight accommodate high quality that can be coordinated by different sorts of amalgams. In light of the generally little segment thickness of the joints and the combination itself, they have expansive applications. A few regions where they are utilized incorporate stockpiling tanks, weight vessels, extensions, procedure plants, fermenting tanks, tanks containing hot liquids and boiling point water, and so forth.
Amazing Durability
The novel structure of the tubes improves their toughness so that the procedure gear keep going long with no consumption, breakage and cause no postponement.
Better Return On Investment
The fittings have low cost in correlation to other combination fittings. Henceforth, they can be utilized for more time periods at a much lower speculation along these lines giving better ROI.
Improved Toughness
Duplex forged fittings are harder than ferritics. They can oppose temperature contrasts without any difficulty and can be utilized as a part of an assortment of anxiety circumstances.
Imperviousness To All Kinds Of Industrial And Marine Corrosions
The forged fittings are profoundly impervious to consumptions brought on by anxiety and don't break under antagonistic circumstances. Thus, they are appropriate for fermenting tanks, tanks of hot liquid/heated water procedure plants furthermore in swimming pool structures.
Accessibility of the forged fittings
The tubes are accessible as union, coupling, fashioned elbow, cross, attachment, connector, full/half coupling, hex areolas, strung elbows/tees, insertions, bushings, manager, plugs and so forth. Duplex UNS S31803 forged fittings supplier gives the enhanced fittings to commercial enterprises over the world at sensible expenses. The merchants and suppliers additionally offer markdown to rehash clients and to the individuals who arrange in mass.
Online retail
With the development of the web, numerous makers, suppliers and merchants offer the items online to the overall commercial enterprises. The buy is made once the national or universal customer has the capacity find the fittings that he particularly requires for his modern procedure change or beginning on the web entryways of steel partnerships and organizations.
Research for new combinations of stainless steel and different components/substances that are utilized as a part of modern procedures never closes. Consequently after short interims of time new throws and grades are made. The UNS Alloys have figured out how to hang on their significance and are exceptionally beneficial in even extreme sort of industry situations.


Jain Steels Corporation
700, Gali Kundewalan, Ajmeri Gate,
Delhi-110006, India

Get in Touch:
Tel: +91-11-23233240 (35 extensions)
Indian Toll Free:  +91-9250360360 (10 extensions)

For Inquiries:
Email: inquiry@jainsteel.com

Wednesday, 29 July 2015

Properties, Advantages And Industrial Applications Of Stainless Steel 904L Tube Fittings And Other Equipments Of The Alloy



Stainless steel 904 l was created to offer those properties that the alloys AISI 316 L and the alloy AISI 317 L failed to offer. Unlike other Stainless Steel 904L Tube Fittings has more amount of copper and hence offers better resistance to corrosion. Particularly, it resists the corrosion acid attacks like the attacks caused by acetic acid, phosphoric acid and sulphuric acid. The alloy does not offer high resistance to corrosion caused by sulfuric acid and hence is has only limited usage in such media. It offers high resistance to corrosion caused by stress and prevents cracking and is also resistant to other kinds of localized attacks like pittance and crevice corrosion.  The alloy contains chromium which forms a passive ring around the tubes and other equipment made form it, thereby protecting them from the corrosive media and other corrosive substances. The alloy also does not suffer from inter-crystalline corrosion when it is welded or cooled as it has lower amounts of carbon. The maximum service temperature of the alloy is 450 degree Celsius.

Precipitation

The alloy shows better resistance to iron precipitation in the form of ferrites in comparison to other alloys that have molybdenum, like stainless steel 316 L and the 317 L.

Other advantageous properties of Stainless Steel 904L Tube Fittings

The alloy and tubes made from it also have better performance ratio when compared to other alloys they have more amounts of molybdenum and nickel and are extremely durable. It is non-magnetic in all kinds of industrial conditions and has better weld ability and formability. As the tubes of the 420 alloy have the unique austenitic double phase structure, they offer high toughness and hardness and are useful even at cryogenic temperature ranges.

Typical industrial applications

Stainless steel 904 L tube manufacturers offer high quality tubes of the alloy and other equipments made from it to industries like gas washing, heat exchangers, seawater cooling, processing of acids like acetic, sulfuric and phosphoric acid in chemical processing industries, instrumentation and control chambers etc.

For any query visit our website--  https://jainsteel.com/stainless-steel-904l-tube-fittings/

Jain Steels Corporation
700, Gali Kundewalan, Ajmeri Gate,
Delhi-110006, India

Get in Touch:
Tel: +91-11-23233240 (35 extensions)
Indian Customer Care:  +91-9250360360 (10 extensions)

For International Inquiries:
Email: marketing@jainsteel.com

For Domestic Inquiries:

Email: sales@jainsteel.com

Friday, 24 July 2015

Titanium Grade 1 Tube For Marine And Chemical Industries



https://jainsteel.com/titanium-grade-1-tube/
Titanium Grade 1 alloy is also called commercially pure titanium. It offers better ductility than most alloys and is also having cold formability. The alloy has adequate strength, best-in-class weldability and even has adequate toughness. The alloy provides resistance to corrosion in mildly reducing and oxidizing environments. Hence titanium grade 1 tubes better resist the chloride ion caused corrosion in marine industries.
Weldability
Grade 1 titanium alloy tubes provide for excellent weldability. As they consist of 1 single phase substantially, the heat treatments, and thermal welding temperatures do not affect the micro-structure of the alloy’s alpha phase. Hence, the welded joints exhibit even better mechanical properties and enhanced ductility than those offered by the parent metal.
Available forms
The tubes provided by the titanium grade 1 tube manufacturers are high in advantageous properties and are used in various industries. Other equipment and products made from the alloy are billet, bar, extrusions, sheet, plate, tubing, strip, pipe, wire forging, fittings etc.
Typical industrial applications
The alloy offers high resistance to corrosion. Hence it is used in chemical industries and marine environment based industries. It can resist both regular and localized corrosions and is resistant to oxidizing media, chloride ion corrosion, crevice corrosion, pittance and other kinds of corrosion. The ASTM B337 Grade 1 and ASTM B338 Grade 1 tubes are widely used in many industries other than the two mentioned above. These include the food, pharmaceutical, oil, refinery, petrochemical and other industries.
Impurities
The alloy contains limited or low amount of impurities in the form of nitrogen, iron and oxygen. The elements raise the yield, hardness and tensile strength of the alloy and hence cause alterations in mechanical properties. Hydrogen impurities harm the ductility of the metal and hence the titanium grade 1 tube dealers and suppliers supply and provide those titanium tubes and equipments that have no or negligible hydrogen content.

For any query visit our website-- https://jainsteel.com/titanium-grade-1-tube/

Jain Steels Corporation
700, Gali Kundewalan, Ajmeri Gate,
Delhi-110006, India

Get in Touch:
Tel: +91-11-23233240 (35 extensions)
Indian Toll Free:  +91-9250360360 (10 extensions)

For Inquiries:
Email: inquiry@jainsteel.com

Saturday, 18 July 2015

Hastelloy C276 Tube Fittings: Best Fittings For Resisting Highly Aggressive Corrosive Media



Hastelloy C276 is today manufactured, used and sold in different forms. It is used in various industrial processes in the form of Hex Bras, Bars, Square Bars, Wire Cuts, Wire Spool, Sheet, Pipes, and Tubes etc apart from being used and sold in the form of tube fittings. The Hastelloy C276 tube fittings are manufactured, sold and used in the form of elbows, tees, fasteners, forgings, machined, disk, coupling, tees, etc.

The alloy contains 57% of nickel, 16% of molybdenum, 15.5 % of chromium, 5.5% of iron, 3.8 % of tungsten and other metals in minor amounts.

Advantages Offered By The Alloy

The alloy provides corrosion resistance and also does not suffer from grain boundary precipitation during welding. Hence the fittings and other equipment of the alloy are suitable for chemical processes and are used widely in this area in chemical industries.

Corrosion Resistance

The alloy is resistant to all kinds of corrosion and can resist localized corrosion caused by chloride ions as well. It can resist crevice, a pittance, and other general corrosions. The alloy can also resist oxidizing environments up to a temperature of 1900 degree Fahrenheit. It can resist various kinds of acidic and alkaline media as well.

Special Properties Of Hastelloy C276 Tubes

The tubes and other equipment of the Hastelloy 276 can resist chlorine dioxide and hypochlorite solutions and also are efficient in resisting chloride gas. The alloy can also resist extremely strong solutions that contain oxidizing salts in the form of cupric and ferric chloride. The alloy is suitable for many different kinds of chemical processing processes as it does not suffer from grain boundary precipitation in high-heat weldable conditions.

Industrial Applications Of Hastelloy C276 Tubes And Other Equipment

The alloy is used in paper industry, gas industry, desulfurization plants, reactors of sulfuric acid, heat exchangers, evaporators, mixers and fitters that are used in environments containing sulfuric acid, process equipments of organic chlorides and equipments for utilizing acid and halide catalysts. The alloy is also used in pharmaceutical, food processing and petrochemical industry in the form of tubes, pipes and other equipments.


For any query visit our website-- https://jainsteel.com/hastelloy-c276-tube-fittings/
Jain Steels Corporation
700, Gali Kundewalan, Ajmeri Gate,
Delhi-110006, India

Get in Touch:
Tel: +91-11-23233240 (35 extensions)
Indian Customer Care :  +91-9250360360 (10 extensions

For Inquiries
Email: inquiry@jainsteel.com

Friday, 17 July 2015

Hastelloy B2- Nickel Molybdenum Alloy With Enhanced Corrosion Resistance



Hastelloy B2 Tubes
Hastelloy B2 is a nickel based alloy which provides excellent resistance to corrosion caused by different kinds of acids like acetic acid, sulfuric acid and hydrochloric acid. Apart from it, the alloy is also resistant to cracking caused by stress corrosion. It can also handle the heat zone attack and thick-knife attack with ease. During welding when the alloy is heated, it resists the carbide precipitates from the formation and hence avoids grain boundary precipitation. That is why it  is suitable for the different applications that are frequently used in the chemical process industries.

Drawbacks

Hastelloy B2 tubes and other equipment made from the alloy can be used in cupric and ferric salt media. This is so because these salts cause corrosion failure that is very fast in nature. The cupric and ferric salts develop when copper or iron from the metal comes in contact with the hydrochloric acid.
B2 alloy equipment should be exposed to a temperature of 1000 to 1600 degree Fahrenheit as at these high temperatures there is a mark reduction in ductility of the alloy equipment.

Hastelloy B2 tubes manufacturers

Hastelloy B2 tubes are manufactured through mechanical and physical processes and involve a high degree of testing. The companies offering them are ISO 9001:2000 certified and design the tubes so that that they provide for their intended corrosions resistance, welding and fabricability properties. The tubes and other equipment of the alloy are shipped to various destinations across the world through the extensive dealer distribution partners that are formed by a network of global partners.

Applications

Hastelloy B2 tubes are used in many industrial processes because of their unique properties. They are hence used in industries including oil extraction, construction, paper, food, medicine, pharmaceuticals, chemical processing and others. The tubes are able to sustain high pressure and also provide for product warranty.

For any query visit our website-- https://jainsteel.com/hastelloy-b2-tubes/

700, Gali Kundewalan, Ajmeri Gate,
Delhi-110006, India

Get in Touch:
Tel: +91-11-23233240 (35 extensions)
Indian Toll Free:  +91-9250360360 (10 extensions)

For Inquiries:
Email: inquiry@jainsteel.com

Wednesday, 15 July 2015

Properties, Corrosion Resistance, And Industrial Applications Of Nickel 200 Tube Fittings


 Nickel 200 Tube Fittings

The low alloy or commercially pure nickel has many kinds of beneficial properties that are beneficial for being used in electronic and in the chemical processing field. Nickel also has better thermal and electrical conductivity and is resistant to many kinds of corrosion.
Nickel 200 contains 99.6% of wrought nickel. The alloy has better mechanical properties and offers excellent resistance to many different kinds of corrosive environments. The nickel 200 tube fittings made from the alloy offer the unique properties of the alloy. The alloy contains 99% of nickel, 0.25 % of copper, 0.40 % of iron, 0.35% of manganese, 0.15% of carbon, 0.35% of silicon and 0.01% of sulfur. The alloy and its tubes, sheets, fittings etc are applied in those structural applications where it is highly important for the equipments of the alloy being used to exhibit high corrosion resistance. Some of the applications of the alloy include applications in missile components, aerospace industry, electronic parts, chemical shipping etc.

The alloy can keep the materials pure and hence the tubes, fittings and other equipment of the alloy are used in food, beverages, pharmaceuticals and other industries.
Corrosion Resistance
The alloy and its tube fittings offer corrosion-resistant properties and are resistant to many different kinds of corrosions.
General Corrosion
The tubes made from the alloy can resist corrosions caused by the electrochemical and chemical reactions that frequently occur in chemical and other industries.
Localized Corrosions
The alloy can also resist all kinds of specific location corrosion attacks. Some of the localized kinds of corrosion attacks include MIC or microbial influenced corrosion, pittance, crevice etc.
Cracking Assisted By Environmental Conditions
Some metals have certain properties that cause cracking when they come in contact with certain kinds chemical conditions. Nickel 200 and the equipments made from it are free from such non-advantageous properties.
The nickel 200 tube fittings exporters provide high quality, high strength, high corrosion resistant tube fittings that are passed through extensive quality control processes and provide for durability and cost saving at the same time.

For any query visit our website-- 
https://jainsteel.com/nickel-200-tube-fittings/

Jain Steels Corporation
700, Gali Kundewalan, Ajmeri Gate,
Delhi-110006, India

Get in Touch:
Tel: +91-11-23233240 (35 extensions)
Indian Customer Care:  +91-9250360360 (10 extensions)

For Inquiries

Email: inquiry@jainsteel.com

Tuesday, 14 July 2015

Industrial Applications And Chemical Composition Of Inconel 800 Tubes



Inconel 800 tube
Inconel 800 alloy and industrial equipment made from it like tubes, pipes, fittings, etc. are used in a variety of industrial applications because of its unique heat resistance and corrosion resistance benefits. The Inconel 800 tubes are used in heat exchangers and in other kinds of piping systems in the chemical processing industry. In petrochemical industries and refiners, where there are high chances of chloride ion caused stress corrosion and cracking, the tubes offer excellent corrosion resistance. The corrosion resistance of the alloy is intact even in systems that have media containing nitric acid. The tubing of steam generators is made of Inconel 800 alloy, in the nuclear power plants. The electrical heating elements of many of the domestic application are sheathed by Inconel 800 as it provides for heat resistance and corrosion resistance. The liquor heaters and other systems of the paper and pulp industry are often made up of the alloy. The alloy tubes, fittings, etc. are also used in the petroleum processing industry for making the heat exchangers and can cool the air that processes steam.
Chemical composition of the alloy
The alloy contains various elements that combine together to provide the Inconel 800 tubes its required strength and corrosion resistance. The Inconel 800 tube manufacturers pass the tubes through different mechanical, physical and other quality tests to judge them for their qualities and performance.
The alloy has 30 to 35 % of nickel, 19 to 23% of chromium, 39.5% of iron (minimum), 1% of silicon (maximum), 0.10% of carbon, 0.75%of copper, 0.15 to 0.60% of aluminum and 0.15 to 0.60% of titanium. The alloy and tubes have higher mechanical strength than other alloys. The tubes can be used for their strength characteristics up to a temperature of 1500 degree Fahrenheit. Some applications require even greater creep and rupture strength. For these kinds of application, the reformed Inconel 800H and Inconel 800HT alloys are used.

For any query visit our website-- https://jainsteel.com/inconel-800-tube/

Jain Steels Corporation
700, Gali Kundewalan, Ajmeri Gate,
Delhi-110006, India

Get in Touch:
Tel: +91-11-23233240 (35 extensions)
Indian Customer Care:  +91-9250360360 (10 extensions)

For Inquiries:
Email: inquiry@jainsteel.com